Industry
Grease pistols Grease pistol and accessories
Version: 500 cc/, High pressure reinforced hose, 8 x 300 mm and 4-jaw hydraulic gripper head,
• for the highest demands in industry, trade and service • All parts are zinc plated • with grease gun filler nipple. • connection thread M 10 x 1, 400 g - cartridge or bulk grease
Marke: Pressol
Eigenschaften:
Marke: Pressol
Eigenschaften:
81.66 €
Version: 500 cm³, thread M 10 x 1, with jet pipe, straight,
and 4-jaw hydraulic gripper head, 0.8 cm / stroke • for use in hard to reach locations
• designed for specific application in industry
and workshop (automotive and heavy-duty truck sectors)
• filling with bulk grease, grease filling device
or 400 g cartridges according to DIN
• with filling nipple
• 400 bar maximum pressure
• single box packing
Marke: Pressol
Marke: Pressol
107.71 €
Info: The PNEUMAxx is a grease gun with a manually operated charge pump to assist the grease supply with compressed air.
Info: Pneumaxx
Version: • with a reinforced hose M 10 x 1, 11 x 300 mm • with a nozzle tube curved M 10 x 1, 150 mm • with two precision mouthpieces 4 BA, M 10 x 1 • for 400 g cartridge - For use with all high-performance lubricants for industrial environments and toughest BIO greases up to NLGI 3, grease temperature down to -10°C. - Pneumatic grease supply into the grease gun head by means of 4 bar air pressure - Conventional supply by means of compression spring is replaced by pneumatic supply, susceptibility to failure is reduced to a minimum, no grease can enter behind the cuff - Using overpressure and pressure relief valve, the grease gun can be stored in pressure-free environments. - Minimum effort during lubrication due to optimum leverage ratios - Performance unchanged after 5000 operating cycles - Precise fit of pump piston and cylinder (no lubricant leakage) - Separate filling and venting valves in grease gun head - Rapid venting thanks to half rotation of grease gun tube - Grease gun heads made of die-cast zinc Z 410 - Secure grip thanks to knurling - Non-slip grip on grease gun lever
Marke: Pressol
Info: Pneumaxx
Version: • with a reinforced hose M 10 x 1, 11 x 300 mm • with a nozzle tube curved M 10 x 1, 150 mm • with two precision mouthpieces 4 BA, M 10 x 1 • for 400 g cartridge - For use with all high-performance lubricants for industrial environments and toughest BIO greases up to NLGI 3, grease temperature down to -10°C. - Pneumatic grease supply into the grease gun head by means of 4 bar air pressure - Conventional supply by means of compression spring is replaced by pneumatic supply, susceptibility to failure is reduced to a minimum, no grease can enter behind the cuff - Using overpressure and pressure relief valve, the grease gun can be stored in pressure-free environments. - Minimum effort during lubrication due to optimum leverage ratios - Performance unchanged after 5000 operating cycles - Precise fit of pump piston and cylinder (no lubricant leakage) - Separate filling and venting valves in grease gun head - Rapid venting thanks to half rotation of grease gun tube - Grease gun heads made of die-cast zinc Z 410 - Secure grip thanks to knurling - Non-slip grip on grease gun lever
Marke: Pressol
131.93 €
Version: Technische Daten
Fettpressenanschluss druckseitig über Metalladapter: M10 x 1
Füllnippel und Entlüftungsventil: M10 x 1
Füllvolumen (cm³): 500
Füllmöglichkeiten: 400 gr Fettkartusche, DIN 1284, Fettfüllgerät oder loses Fett
Spezifikation
· Mit 1 Panzerschlauch, M10 x 1, 11 x 300 mm
· Mit 1 Düsenrohr, gebogen, M10 x 1, 150 mm
· Mit 2 Präzisionsmundstücken, 4 BA, M10 x 1
Marke: Pressol
Marke: Pressol
135.21 €
Version: Fettpressenanschluss druckseitig über Metalladapter: M10 x 1
Füllnippel und Entlüftungsventil: M10 x 1
Füllvolumen (cm³): 500
Füllmöglichkeiten: 400-g-Fettkartusche, DIN 1284, Fettfüllgerät oder loses Fett
Durchmesser Fettpumpkolben (mm): 9
Betätigung Fettpumpkolben: mittels Handhebel
Fördervolumen/Hub (cm³):proportional zum Handhebelweg, max. 1,4
Förderdruck bis (bar): bis 400
Berstdruck System (bar): 850
Berstdruck Fettpressenkopf (bar): 1200
Schubstangenbetätigung: über T-Griff
Verschlussdeckel: fest
Wandstärke Fettpressenrohr (mm): 1
Spezifikation
· mit 1 Panzerschlauch, M 10 x 1, 11 x 300 mm
· mit 1 Präzisionsmundstück, 4 BA, M10 x 1
Marke: Pressol
Marke: Pressol
116.96 €
Version: 500 cm³?, Vario System,
mit Hochdruck Panzerschlauch, 8 x 300 mm
und 4-Backen-Hydraulikgreifkopf, Fettpressenrohr 1.0 mm Wandstärke,
8 mm Druck-Kolben, ohne Fettpressen-Füllnippel, Gewindeanschluss M 10 x 1, für 400 g - Kartusche oder loses Fett
Marke: Pressol
Marke: Pressol
63.50 €
Version: Advantages over conventional systems:
NEW INNOVATION variable stroke: short stroke system, lubrication point can be overridden with small strokes
higher pressure up to max. 400 bar
larger output per stroke
cartridge emptied in 222 strokes
complete emptying thanks to special piston shape
filling level of cartridge can be checked at any time
for 500 g cartridge
with high-pressure rubber hose
with seal and precision mouthpiece
Technical information:
Pressure-side connection: M 10 x 1
Diameter grease pump piston: 10 mm
System burst pressure: 850 bar
Grease gun head burst pressure: 1200 bar
Dimensions LxWxH: 350 x 195 x 30 mm
Weight: 1,17 kg
Special features:
The device can process greases up to NLGI 2 at 20°C
97% effective supply volume
Easy assembly via vacuum principle
Pump piston, cylinder and O-ring with 6 ? fit accuracy? (no grease leakage)
In cases of high counter pressure, e.g. resinated lubrication points, the lubrication point can be overridden with significantly lower compressive force thanks to the short stroke
Grease supply variable from 0,1-2,4 cm³ per stroke
Quick and clean cartridge change
Environmentally friendly as cartridges are emptied completely
Permanent monitoring of filling level and grease type possible
Ergonomic handle, non-slip
Marke: Pressol
Marke: Pressol
89.53 €
Info: for H- K- and D-connector
Version: Inhalt (g): 150 Stahl, verzinkt Mundstück: Spitz- und Hohl-/Universalmundstück Anschluss: für Kegel- und Kugelschmiernippel, DIN 71412, DIN 3402, für Trichterschmiernippel, DIN 3405 Druck (bar): 60 - 80 Maße ø x L (mm): 42 x 210
Marke: Pressol
Version: Inhalt (g): 150 Stahl, verzinkt Mundstück: Spitz- und Hohl-/Universalmundstück Anschluss: für Kegel- und Kugelschmiernippel, DIN 71412, DIN 3402, für Trichterschmiernippel, DIN 3405 Druck (bar): 60 - 80 Maße ø x L (mm): 42 x 210
Marke: Pressol
48.62 €
Version: Fettpressenanschluss druckseitig: M10 x 1
Füllnippel und Entlüftungsventil: M10 x 1
Füllvolumen (cm³): 500
Füllmöglichkeiten: 400-g-Fettkartusche, DIN 1284, Fettfüllgerät oder loses Fett
Übersetzungsverhältnis: 50:1
Fettförderung in den Fettpressenkopf: mittels Federkraft
Durchmesser Fettpumpkolben (mm): 6
Betätigung Fettpumpkolben: Einzelhub-Fettförderung
Fördervolumen/Hub (cm³): 0,8
Empfohlener Luftdruck (bar): 6
Minimaler Luftdruck (bar): 2
Maximaler Luftdruck (bar): 8
Druckluftanschluss: Schnellkupplung Rectus, Typ 26
Pumpendruck bei 8 bar Druckluft (bar): 400
Berstdruck System (bar): 850
Berstdruck Fettpressenkopf (bar): 1200
Schubstangenbetätigung: über L-Griff
Verschlussdeckel: lose
Wandstärke Fettpressenrohr (mm): 1,0
Spezifikation
· Panzerschlauch, M 10 x 1 a, 11 x 300 mm
· Präzisionsmundstück, 4 BA, M 10 x 1 i
· Füllnippel (FN), M 10 x 1 a
Besondere Merkmale
· Das Gerät verarbeitet Fette bis NLGI 2
Marke: Pressol
Marke: Pressol
163.77 €
Version: mit Zubehör, Fettförderung durch 18V Elektromotor. Betriebsdruck max.: 400 bar Maximaler Druck : 650 bar Schnell-Ladezeit Akku: 1 Stunde
1 Hochdruck Fettförderschlauch mit Knickschutzfeder, 11 x 1000 mm, 4 Backen-Hydraulikmundstück, Batterie Ladegerät (230V), Mit 2 Akkus NiCd 18V, Schultertragegurt, Verpackt im Tragekoffer
Marke: Pressol
Marke: Pressol
555.40 €
Info: for 500g screw-in cartridges
Version: Grease gun connection, pressure side: M10 x 1 mm Air flow / stroke (cm³): 0.8 Feed pressure. (bar): 260 Bursting System (bar): 850 Burst pressure grease gun head (bar): 1200 Surface treatment: galvanized A2K Dimensions LxWxH (mm): 230 x 66 x 180 Dimensions LxWxH (mm): 235 x 170 x 70
Version: Grease gun connection, pressure side: M10 x 1 mm Air flow / stroke (cm³): 0.8 Feed pressure. (bar): 260 Bursting System (bar): 850 Burst pressure grease gun head (bar): 1200 Surface treatment: galvanized A2K Dimensions LxWxH (mm): 230 x 66 x 180 Dimensions LxWxH (mm): 235 x 170 x 70
151.30 €
* For EU all prices including VAT, plus shipping.