MTD GES 45 12B-T02Z678 (2000) Handle, Wheels, Cutting hight adjustment Spareparts

Screw

Note: This article is 4 times installed in the device, the price is per piece!

Article Number:

21.5441.17

Pos:

DINNORM:

M5X20 / ZN5GL CB / 8.8

Modell Year:

GES 45 / 2000

no longer available

MTD Petrol mower self propelled GES 45 12B-T02Z678 (2000) Handle, Wheels, Cutting hight adjustment

Pos	Article Number	Description
1	782-0349638	MOWER HOUSING
2	782-0325638	HANDLE HOLDER RIGHT
3	782-0326638	HANDLE HOLDER LEFT
4	000.02.578	SCREW M8X12
5	736-0700	WASH:FLAT:8.4 x 16 x 1.60
6	736-0708	LOCK WASHER SCHNORR D 8
7	712-0690	NUT:HEX:M8-1.25 DIN 934
9	000.02.499	SCREW
10	710-1719	BOLT:CRG:M8x1.25x50 DIN 603
11	079.06.307	INSULATING WASHER
12	079.06.308	HANDLE BRACKET
13	731-2029	UPPER REAR AXLE BRACKET
14	22.3419.11	Screw
15	736-0756	L-WASHER
16	712-0689	NUT:HEX:M6-1:DIN 934
17	731-2080	LOWER REAR AXLE BRACKET
18	21.5441.17	Screw
19	736-0602	WASHER A 5,3 DIN 125
20	712-0675	NUT:HEX:M5 x.80:DIN 985
21	731-1822A637	REAR FLAP - MELON YELLOW -
26	738-1030	SCREW - INDIVIDUAL HEIGHT ADJ.
27	736-0651	WASH:BELL:25mmODx12.2IDx1.6
28	682-0232	LVR ASM:HGT:L0-WHL
29	782-0617	Adjusting arm
30	079.30.313	ADJUSTING PLATE
31	736-0701	WASH:FLAT:8.4x24x2.00 DIN 9021
32	736-0708	LOCK WASHER SCHNORR D 8
33	712-0690	NUT:HEX:M8-1.25 DIN 934
34	720-0334662	HUB CAP WITH MTD LOGO, PREMIUM
35	079.29.166	Wheel bolt
36	734-1897	WHEEL DIA 180mm, BAR, SLEEVE B
37	736-0695	WASHER
77	731-1057	UPPER DRIVE COVER
78	731-0620	LVR:SHFT
79	731-1058	COVER-HALF CONT-LWR
80	746-1024	BOWDEN DRIVE CONTROL
81	731-1059	CABLE MOUNTING CAP
82	710-0841	SCR:AB
85	749-1150	STD-HANDLE
86	747-1006637	BRAKE BAIL
87	746-0978	CABLE: BRAKE: ASSY.
92	079.13.632	GAS CONTROL ASSY.
93	746-0989	BOWDEN WIRE GAS
94	23.5422.23	CURVED CARR. BOLT M6x30
95	736-0668	WASH: FLAT: 6.4x12x1.6
96	736-0648	WASHER:LOCK:B6:DIN 127
97	24.3423.14	Nut
98	000.02.621	STARTER HOLDER
99	736-0668	WASH: FLAT: 6.4x12x1.6
100	712-0691	NUT:HEXLK:M6-1:NYLON:DIN 985
101	749-1033637	HANDLE LOWER PART
102	731-1820	CBL:GDE
103	736-0700	WASH:FLAT:8.4 x 16 x 1.60
104	736-0689	WASH:LOCK:B 8.4:DIN 6798
105	000.02.377	WING NUT
106	000.70.563	CABLE TIE