MTD untill 2011 BM 87-35 25A-FM0G678 (2005) Control cables, Handle, Cutter bar Spareparts

KULISSENSTEIN

Article Number:

26.1005.248

Pos:

DINNORM:

26.1005.248

Modell Year:

BM 87-35 / 2005

no longer available

MTD untill 2011 Cutter bar mower BM 87-35 25A-FM0G678 (2005) Control cables, Handle, Cutter bar

Pos	Article Number	Description
1	86.2356.100	SCREW M6X50 UNI 5933
2	26.1010.305	STIRRUP
3	32.1010.920	THROTTLE LEVER
4	26.1010.900	HANDGRIFF D.22
5	712-0691	NUT:HEXLK:M6-1:NYLON:DIN 985
6	26.1010.304	RASTSEGMENT ROT
7	712-0692	NUT:HEXLK:M8-1.25 NYLON DIN985
8	86.2494.000	SCREW
9	32.1010.901	GUMMISCHEIBE D=9X25X3
10	26.1010.302	KUPPLUNGSHEBEL ROT
11	26.0010.216	HEXAGON SCREW M5
12	736-0668	WASH: FLAT: 6.4x12x1.6
13	712-0675	NUT:HEX:M5 x.80:DIN 985
14	26.0050.258	HANDLE-BLADE PIVOT
15	092.48.583	BOWDEN WIRE
16	32.1010.182	UPPER HANDLE
17	32.1010.314	SCHALTZUG MÄHER EIN-AUS
18	86.2881.000	SCHRAUBE UNI 5737 M8X50
19	26.0010.281	WING NUT
20	736-0700	WASH:FLAT:8.4 x 16 x 1.60
21	30.0010.052	HITCH TUBE ASSY.
22	26.1400.242	OIL- PLUG
23	86.2787.500	SCREW
24	32.1010.114	HANDLEBAR R.H.
25	32.1010.300	COUPLING BOWDEN
26	32.1010.115	LEG TUBE L.H.
27	86.2785.000	SCHRAUBE M8X40 UNI 5737
28	32.1010.900	SCHWINGUNGSDÄMPFER
29	84.3708.000	SCHEIBE 9X24X2 UNI 6593
30	30.0010.053	KONUS-UNTERLAGSSCHEIBE
31	85.0100.100	SPACER
33	26.1010.210	SEILNIPPEL
35	81.4574.000	MUTTER M8 UNI 5588
36	81.4703.000	SICHERUNGSMUTTER M12 NIEDRIG
37	736-0704	WASH:FLAT:13ID X 24OD:DIN 125
38	26.1020.928	Protection plate
39	86.2555.000	SCHRAUBE M8X20 UNI 5739
40	84.3711.000	SCHEIBE D8,5X24X4
41	81.4794.000	SICHERUNGSMUTTER M16
42	84.3994.000	SCHEIBE D17X30X3 UNI 6592
43	32.1020.127	REINFORCEMENT-HOOD
44	81.4767.000	SICHERUNGSMUTTER M14 NIEDRIG
45	32.1005.292	SCHEIBE D17.2X29.8
46	32.1020.128	HAUBENHALTER, VORNE
47	86.4334.010	SCHRAUBE M14X100 UNI 5737
48	32.1020.169	MESSERTRÄGER ROT RAL 3002
49	32.1300.282	IDLER SPRING
50	26.1005.246	OBERBÜCHSE D14.2X30 H10.7
51	26.1005.247	COVER DISK
52	81.2687.000	NADELLAGER 25-32-16 HK2516
53	86.2860.000	SCHRAUBE M8X45 DIN 7984
54	23.0330.209	washer
55	26.1005.215	BUSHING
56	80.1309.000	SEEGER RING I42UNI4737
57	81.2632.000	KEGELROLLENLAGER 6004-2RS1
58	26.1005.214	BEARING SHAFT
59	26.1005.210	V-BELT PULLEY CPL.
60	32.1005.192	KEILRIEMEN SPZ 772
61	82.6016.000	SCHMIERNIPPEL M6 HYDRALIC
62	32.1020.300	DRIVE LEVER
63	26.1005.245	ZAPFENSCHRAUBE 14X30 UNI 5923
64	26.1005.224	INNENRING
65	27.0011.715	SCHEIBE D25.2X35.8 H1
66	26.1005.244	BEARING SHAFT
67	80.3208.000	OR RING 3125 (31.42X2.62)
68	80.3180.000	OR-RING 15.8X2.62
69	26.1005.229	BUSHING
70	81.2558.070	NADELLAGER 15X21X16
71	26.1005.900	DRIVE LEVER
72	84.3713.000	SCHEIBE D9X32X.25
73	86.2474.050	SCHRAUBE M8X14
74	84.3667.010	SCHRAUBE M8X40 UNI 5737
75	26.1005.248	KULISSENSTEIN
76	26.1005.904	CUTTERHEAD ASSY 38"
77	81.4645.000	SICHERUNGSMUTTER M10 NIEDRIG
78	26.1020.066	UPPER BLADE
79	86.2672.000	SCHRAUBE M8X20 UNI 5923
80	26.1020.112	LOCATION PLATE
81	26.1020.114	HINTERANLAGE
82	80.8867.000	SENKNIET 5X10.5 UNI 752
83	26.1020.065	UPPER BLADE
84	26.1020.027	OBERMESSER L=87 ESM
85	26.1020.057	UNTERBALKENKLINGE
86	26.1020.115	MESSERSCHUTZ L-870
87	86.3206.000	SCHRAUBE M10X20 UNI 5739
88	26.1020.120	BAR BODY 87 CM
89	86.2724.000	SCHRAUBE M8X30 UNI 5739
90	26.1020.116	SCHLEIFKUFE
91	80.8866.000	SENKNIET 5.2X14 UNI 752

Bankeinzug, MasterCard, Visa, American Express, PayPal, Nachnahme, Vorauskasse, Sofortüberweisung

Report Error

Help us to improve this site. Notify us if something is wrong here.