Agricultural Parts
Tractor types: FW 139 (Farmer 2), FW 228 (Farmer 2D) Engine types: KD 110.5, D 208.3
| Bild | Titel | Info | Motortypen | Typen | Info | Bildnummer | Eigenschaften | €* |
|---|---|---|---|---|---|---|---|---|
 | Top gasket set | KD 10.5 | KD 10.5 | FW 139, FW 228 #Please note engine type | 115.75 | |||
 | Intake / exhaust manifold gasket | KD 10.5 | 4.49 | |||||
 | Rocker cover gasket | KD 10.5 | 7.34 | |||||
| KD 10.5 | 4.62 | |||||||
 | Oil filter seal | KD 10.5 | 13.86 | |||||
 | KD 10.5 | 11.32 | ||||||
 | KD 10.5 | 10.57 | ||||||
 | KD 10.5 | 9.86 | ||||||
 | Piston set | note engine type | KD 10.5 | FW 139, FW 228 | 629.28 | |||
 | KD 10.5 | 13.94 | ||||||
 | KD 10.5 | 28.18 | ||||||
 | KD 10.5 | 28.18 | ||||||
 | Valve guide | KD 10.5 | 33.12 | |||||
 | KD 10.5 | 9.97 | ||||||
 | KD 10.5 | 17.95 | ||||||
 | KD 10.5 | 70.96 | ||||||
 | KD 10.5 | 386.87 | ||||||
 | KD 10.5 | 30.13 | ||||||
 | Conrod bearing | standard Ø 58 mm | KD 10.5 | 29.90 | ||||
 | Pleuellager 0,25 | 0,25 mm Untermaß | KD 10.5 | FW 139, FW 228 | Ø 57,75 mm | 73.58 | ||
 | Pleuellager 0,5 | 0,5 mm Untermaß | KD 10.5 | FW 139, FW 228 | Ø 57,5 mm | 71.25 | ||
 | KD 10.5 | 21.71 | ||||||
 | Oil filler cap | KD 10.5 | 15.61 | |||||
 | KD 10.5 | 74.03 | ||||||
 | Top gasket set | KD 110.5 | 1 | 62.29 | ||||
| Rocker cover gasket | KD 110.5 | 2 | 7.34 | ||||
 | Top gasket set | D 208.3 | 1 | 58.79 | ||||
 | Rocker cover gasket | D 208.3 | 2 | 3.10 | ||||
 | Intake/exhaust manifold gasket | KD 110.5, D 208.3 | 4.49 | |||||
 | Oil sump gasket | KD 110.5, D 208.3 | 27.35 | |||||
 | Shaft seal | crankshaft front | KD 110.5, D 208.3 | crankshaft front | 44.67 | |||
 | Shaft seal | crankshaft rear | KD 110.5, D 208.3 | crankshaft rear | 46.94 | |||
 | Gasket timing case | KD 110.5, D 208 | 54.01 | |||||
 | Gasket water pump intermediate flange | water pump | KD 110.5, D208 | FW 139, FW228 | 20.88 | |||
 | KD 110.5, D 208 | 26.73 | ||||||
| KD 110.5, D 208 | 11.32 | ||||||
| KD 110.5, D 208 | 4.62 | |||||||
 | D 208.3, KD 110.5 | 25.72 | ||||||
| KD 110.5, D 208 | 7.27 | |||||||
| KD 110.5, D 208 | 10.57 | ||||||
 | Piston set | KD 110.5 | Ø 90 mm | 244.79 | ||||
| O-ring | KD 110.5 | 12.37 | ||||||
 | Piston | D 208.3 | 1 | Ø 95 mm | 134.36 | |||
 | Bush | D 208.3 | 2 | 104.80 | ||||
 | O-ring | D 208.3 | 3 | 18.30 | ||||
 | Inlet valve | D 208.3 | 1 | 28.18 | ||||
 | Exhaust valve | D 208.3 | 2 | 27.05 | ||||
| Valve guide | KD 110.5, D 208 | 33.12 | |||||
 | KD 110.5, D 208 | 20.23 | ||||||
| KD 110.5, D 208 | 9.97 | ||||||
| KD 110.5, D 208 | 17.95 | ||||||
 | Main bearing | Standard | KD 110.5, D 208 | standard Ø 65 mm | 45.86 | |||
 | KD 110.5, D 208 | 46.29 | ||||||
| KD 110.5, D 208 | 42.05 | ||||||
| KD 110.5, D 208 | 39.66 | ||||||
 | Thrust bearing | Standard | KD 110.5, D 208 | standard Ø 65 mm | 87.27 | |||
| Oil filler cap | KD 110.5, D 208 | 15.61 | |||||
 | Connecting rod bolt | KD 110.5, D 208 | FW 139, FW 228 | 22.66 | ||||
| KD 110.5, D 208 | 21.71 | ||||||
| Conrod bearing | standard Ø 58 mm | KD 110.5, D 208 | 29.90 | ||||
| Pleuellager 0,25 | 0,25 mm Untermaß | KD 110.5, D 208 | 73.58 | ||||
| Pleuellager 0,5 | 0,5 mm Untermaß | KD 110.5, D 208 | 71.25 | ||||
| KD 110.5, D 208 | 386.87 | ||||||
| KD 110.5, D 208 | 30.13 | ||||||
| KD 110.5 | 70.96 | |||||||
 | D 208 | 102.17 | ||||||
 | D 208 | 40.08 | ||||||
 | D 208 | 196.89 | ||||||
 | KD 110.5 | 173.59 | ||||||
 | D 208 | 94.89 | ||||||
 | D 208 | 14.33 | ||||||
 | KD 110.5, D 208 | 11.13 | ||||||
| KD 110.5, D 208 | 9.43 | |||||||
* For EU all prices including VAT, plus shipping.
