Industry
Dirko Original Elring sealant
| Bild | Titel | Info | Container | Marke | Info | €* |
|---|---|---|---|---|---|---|
 | Universal sealant Dirko | Permanently elastic, temperature resistant universal sealing compound which saves time and money Dirko seals surfaces, gaps and cracks reliably. Because of its extraordinary features, Dirko is high-amperage and versatilely applicable. Dirko's viscosity and absolutely permanent elasticity rapidly stop the leakage of oil, water and air. Even structural parts with hairline cracks are made functional again within minutes. Dirko is resistant against ozone, sunlight, extreme weather conditions, hot and cold water, sea water, greases, mineral oils (also with additives), aliphatic hydrocarbons, detergents and numerous chemicals. These advantages make Dirko equally suitable to be used on its own, as a sealant applied from the outside between surfaces without disassembly or in combination with flat gaskets. Application: Clean and degrease the sealing surfaces. Apply Dirko. Film formation time approx. 5-10 minutes. "Wet in wet" assembly, i.e. the parts are joined immediately before a film begins to form, ensures instant sealing. Temperature stability: -50° C up to +180° C. | 70 ml (100 g) | Elring | 52.59 | |
 | Universal sealant Dirko | Permanently elastic, temperature resistant universal sealing compound which saves time and money Dirko seals surfaces, gaps and cracks reliably. Because of its extraordinary features, Dirko is high-amperage and versatilely applicable. Dirko's viscosity and absolutely permanent elasticity rapidly stop the leakage of oil, water and air. Even structural parts with hairline cracks are made functional again within minutes. Dirko is resistant against ozone, sunlight, extreme weather conditions, hot and cold water, sea water, greases, mineral oils (also with additives), aliphatic hydrocarbons, detergents and numerous chemicals. These advantages make Dirko equally suitable to be used on its own, as a sealant applied from the outside between surfaces without disassembly or in combination with flat gaskets. Application: Clean and degrease the sealing surfaces. Apply Dirko. Film formation time approx. 5-10 minutes. "Wet in wet" assembly, i.e. the parts are joined immediately before a film begins to form, ensures instant sealing. Temperature stability: -50° C up to +180° C. | 310 ml cartridge | Elring | cartridge 310 ml | 98.52 |
* For EU all prices including VAT, plus shipping.
Report Error
Help us to improve this site. Notify us if something is wrong here.